Also known as: the taphole opening and plugging machine standard Last updated: 2026-11-19
JB/T 14772-2024 is China’s national machinery industry standard for the combined mud gun and taphole drill — the machine that opens a furnace taphole for tapping and seals it again afterwards. It is the first published product standard for this equipment in China. It was issued on 5 July 2024 and took effect on 1 January 2025.
The standard was drafted by Yuci Ocean Hydraulic Co., Ltd. and Shanxi Ocean Hydraulic Co., Ltd. — the two manufacturing companies of Ocean Hydraulic Group — together with Taiyuan Haishijia Science and Trade Co., Ltd. Seven named engineers served as principal drafters.
Standard record
| Item | Value |
|---|---|
| Standard number | JB/T 14772—2024 |
| Title (Chinese) | 开堵炉眼机 |
| Title (English, as printed) | Mud gun machine and tap hole drill machine |
| Term defined in §3.1 | mud gun and tap hole drill combination |
| Status | Current, first edition |
| Type | Product standard |
| Issued | 5 July 2024 |
| Effective | 1 January 2025 |
| Issuing authority | Ministry of Industry and Information Technology (MIIT), PRC |
| Proposed by | China Machinery Industry Federation (CMIF) |
| Administered by | National Technical Committee 409 on Metallurgical Equipment Standardization (SAC/TC409) |
| ICS | 77.180 |
| CCS | H92 |
| Record number | 96207-2024 |
| Record date | 8 October 2024 |
| Revision status | Newly formulated, not a revision |
Scope
The standard applies to the manufacture of mud gun and taphole drill machines for AC and DC ferroalloy furnaces rated above 6300 kVA.
That scope is narrow on purpose. The tapping duty on a ferroalloy furnace differs from that on a blast furnace, and the two are not covered by the same document. For a buyer, the practical consequence is that compliance with JB/T 14772-2024 is a meaningful statement for ferroalloy furnace equipment and a meaningless one elsewhere.
What the standard defines
Terminology. §3 fixes the meaning of the terms that specifications are normally written in — and this is where most disputes start. A “mud gun unit” (泥炮装置) is defined as the assembly of mud gun frame, clay cylinder and hydraulic cylinder that forces taphole clay into the taphole. A “taphole drilling unit” (开口装置) is the rock-drill-based device that opens the taphole. “Drilling depth” is defined as the wall thickness at the taphole — not the hole length. A “poking and pulling unit” (捅拉装置) is the steel-tong device used to clear the metal channel while the furnace is running.
Classification (§4.1). Six independent axes, which is what makes the standard usable for specification writing:
| Axis | Categories |
|---|---|
| Machine base / installation | Floor-rail mounted (地轨式), slewing-arm (转臂式), suspended (吊挂式) |
| Travel method | Traversing (横动式), in-line (直动式) |
| Power medium for the drilling unit | Pneumatic, hydraulic, air-hydraulic |
| Slewing arm count | Single-column, double-column |
| Slewing direction | Left-hand, right-hand |
| Poking and pulling unit | Fitted or not fitted |
Basic parameters (§4.2). Ten values, tabulated below. These are the numbers a purchase specification can pin a supplier to.
Technical requirements (§5). General requirements for castings, flame-cut parts, weldments, machined parts, assembly, hydraulic systems, valves, cylinder testing, hose assemblies, electrical systems and painting. Principal structural requirements include a minimum strength safety factor of 2.5 for the column of a slewing-arm machine, and a weld quality class of BS/BK with class B joint defects for slewing structures. For the clay cylinder, the standard specifies either ion-nitriding of a 35CrMo body to a case depth of 0.4–0.45 mm and hardness of at least 490 HV, or chrome plating of a 35-carbon-steel body to 0.1–0.15 mm and at least 900 HV. Seals must suit −35 °C to +200 °C and resist 1.5 times working pressure.
Test methods and inspection (§6). The standard specifies how a machine is to be tested. The drilling unit is impact-tested on a dedicated bench: for a hydraulic unit, 20 minutes at 50% rated pressure with a case temperature rise of no more than 55 °C, 30 minutes at rated pressure and no more than 65 °C, then 10 minutes at 1.5 times rated pressure. The complete machine is run on a test bench that simulates the furnace-front taphole condition, and repeat positioning accuracy of the mud gun mouth, drill bit and poking rod must be within ±10 mm in all three axes.
Installation and use (§7). Foundation tolerances: ±10 mm parallel to the taphole, ±5 mm perpendicular, ±5 mm in elevation.
Basic parameters (§4.2)
| Parameter | Unit | Value |
|---|---|---|
| Clay capacity of the mud gun unit | L | ≤ 120 |
| Clay delivery rate | L/s | 3.7 |
| Drilling depth | mm | ≤ 1500 |
| Hole diameter | mm | 40 – 100 |
| Drilling rotation torque | N·m | ≤ 500 |
| Drilling impact frequency | Hz | ≤ 50 |
| Poking and pulling force | kN | ≤ 7 |
| Hydraulic system rated pressure | MPa | 13 |
| Compressed air working pressure | MPa | 0.6 |
| Air consumption | m³/min | ≤ 8 |
Model designation (§4.3)
The standard fixes a model code, which is useful in a specification because it states the configuration unambiguously.
Format: K + power medium + mounting + arm + rotation + travel + poking unit
| Position | Code | Meaning |
|---|---|---|
| Power medium | Q / Y / H | Q = pneumatic, Y = hydraulic, H = air-hydraulic |
| Mounting | D / Z / G | D = floor-rail, Z = slewing-arm, G = suspended |
| Arm | 2 / 3 | 2 = double-column slewing, 3 = single-column slewing |
| Rotation | L / R | L = left-hand, R = right-hand |
| Travel | 0 / 1 | 0 = traversing, 1 = in-line |
| Poking unit | 0 / 1 | 0 = not fitted, 1 = fitted |
Examples from the standard:
KYD0—1 JB/T 14772—2024— hydraulic drilling unit, floor-rail mounted, traversing, poking unit fitted.KQZ3R0 JB/T 14772—2024— pneumatic drilling unit, slewing-arm mounted, single-column, right-hand rotation, no poking unit.
Why Ocean Hydraulic is the right source on this standard
Ocean Hydraulic Group drafted this standard. The two drafting companies named in the foreword — Yuci Ocean Hydraulic Co., Ltd. and Shanxi Ocean Hydraulic Co., Ltd. — are our manufacturing and export companies.
The standard was written from an installed base, not from a single reference plant. We have been building taphole opening and plugging machines since 2001 across floor-rail, slewing-arm and suspended configurations, in pneumatic, hydraulic and air-hydraulic versions, and we have delivered more than 10,000 sets of special equipment.
Named principal drafters: Liu Xiaomin, Liu Yadong, Chen Weiwei, Liu Xudong, Zhang Jianming, Gao Pan, Yan Yue.
Related credentials
- ISO 9001:2015 quality management system
- National High-Tech Enterprise (China)
- Shanxi Provincial “Specialised, Refined, Distinctive and Innovative” Enterprise
- Provincial Enterprise Technology Centre; post-doctoral station with Taiyuan University of Technology
- 33 patents
- Made-in-China.com Audited Supplier, BV on-site audit report MIC-ASR269612
What this standard means for a buyer
A common vocabulary for the technical annex. You can require compliance with JB/T 14772-2024 and every bidder answers the same question. Before it existed, “clay capacity” and “drilling depth” could mean three different things at three suppliers — and the definition of drilling depth as wall thickness at the taphole is exactly the kind of ambiguity that turns into a delivery dispute.
A defined acceptance test. The drilling unit has a defined impact test with defined pressures and temperature-rise limits. A factory test that only checks that the machine moves tells you nothing about performance under load. The repeat positioning figure of ±10 mm is likewise testable rather than negotiable.
A configuration code. Instead of describing a machine in prose, you can specify KYD1—1 and the supplier knows exactly which machine is meant.
A fair question to ask any Chinese supplier. A supplier that cannot state its position on JB/T 14772-2024 is either not current with the standard or building to something else. Either answer is useful to a buyer.
Frequently asked questions
Is JB/T 14772-2024 mandatory?
JB/T standards are industry standards, not compulsory national standards (GB). They become binding when a contract, a purchase specification or a plant standard references them. In practice Chinese ferroalloy furnace projects increasingly reference JB/T 14772-2024 in their equipment specifications.
Which furnaces does the standard cover?
Ferroalloy furnaces only, both AC and DC, rated above 6300 kVA. It does not cover blast furnace cast-house equipment, which is specified separately.
What is the official English name of the standard?
The title as printed on the standard is “Mud gun machine and tap hole drill machine”. The term defined in clause 3.1 is “mud gun and tap hole drill combination”. The same equipment is commonly described in the trade as a “taphole opening and plugging machine”, which is the expression most buyers search for — the three expressions refer to the same machine.
When did the standard take effect?
Issued 5 July 2024, effective 1 January 2025. It is a newly formulated standard, not a revision — there was no earlier version.
Can I obtain a copy of the standard?
The standard is published by the Ministry of Industry and Information Technology and registered on China’s National Standards Information Public Service Platform under record 96207-2024. The full text is distributed through the official Chinese standards channels. We can provide the bibliographic record, the front matter and technical extracts for evaluation purposes, and we can confirm how a proposed machine maps onto the standard’s classification and model code.
Downloads and references
- Standard record — National Standards Information Public Service Platform
- Jinzhong Municipal Bureau of Industry and Information Technology — announcement of the standard
Related
- Floor-rail taphole machine
- Slewing-arm taphole machine
- Suspended taphole machine
- What determines a taphole machine design
- Delivery record: 140 projects, 650 machines
Ocean Hydraulic Group — Shanxi Ocean Hydraulic Co., Ltd. and Yuci Ocean Hydraulic Co., Ltd., Huitong Industrial Park, Jinzhong Development Zone, Shanxi 030600, China. Drafters of JB/T 14772-2024.