What Determines a Taphole Machine Design

Last updated: 2026-11-18

Every taphole machine we build is designed to one furnace. There is no catalogue rating to compare, so this page sets out the ten parameters that decide the design, which side controls each one, and the design envelope from JB/T 14772-2024.

Ten design drivers

ParameterDesign envelopeWhat determines itWho provides
Clay barrel capacityup to 120 LHole diameter × hole depth × clay per tap × taps per dayClient gives hole size; we size the barrel
Clay delivery rate3.7 L/sTapping cycle time — plugging must finish within the cycleWe design to the cycle
Drilling depthup to 1,500 mmWall thickness at the tapholeClient (furnace drawing)
Hole diameter40 – 100 mmMetal flow requirement, clay strength, bit sizeClient (process)
Drilling rotation torqueup to 500 N·mClay hardness and hole diameterWe design
Drilling impact frequencyup to 50 HzRock drill selection, wall thicknessWe design
Poking and pulling forceup to 7 kNWhether the metal channel must be cleared onlineClient (process)
Hydraulic system pressure13 MPa ratedSystem standardStandard
Compressed air pressure0.6 MPaPlant utility supplyClient
Air consumptionup to 8 m³/minRock drill selection and impact frequencyWe design

Values marked “up to” are the limits set in JB/T 14772-2024 §4.2 for this class of machine. A specific machine is normally built inside those limits, to the furnace it serves.

The four things that change most between projects

Mounting arrangement. Floor-rail, slewing-arm or suspended. Decided by platform load capacity, available space, and how many tapholes the machine must reach from one parking position.

Drilling unit drive medium. Pneumatic, hydraulic or air-hydraulic. Decided by whether the plant has a reliable compressed air supply, what power costs, and what maintenance skill is available on site.

Control method. Manual multi-way valve, local push-button, wireless remote, or integration with the plant control room. Decided by the safety distance the plant wants between operator and taphole.

Poking and pulling unit. Fitted or not. Usually fitted where the slag and metal separate poorly and the channel has to be cleared while the furnace is running.

What we need from you to propose a machine

  1. Furnace type and rated capacity in kVA
  2. Number of tapholes and their elevation above the operating floor
  3. Taphole wall thickness and hole diameter
  4. Tapping cycle: taps per day and time available per tap
  5. Platform load capacity and available footprint
  6. Compressed air pressure and flow available at the interface point
  7. Power supply: voltage, frequency, phases
  8. Control method required and any plant-level interface

With these eight values we can propose an arrangement drawing. Without them, any quotation would be guesswork.

Why we do not publish a fixed specification

A supplier who quotes you a fixed rating has not yet looked at your furnace. Taphole wall thickness sets the drilling depth. Hole diameter and tapping frequency set the clay capacity. Platform load decides whether the machine is floor-mounted or suspended. None of these are the same twice.

Frequently asked questions

Can I use a machine built for another furnace?

Only if the taphole geometry, cycle time and platform arrangement match. Mounting and travel are the parts that most often cannot be re-used.

How long does a custom design take?

It depends on how many of the eight inputs above are already fixed. We will give a schedule with the technical proposal rather than before we have seen the furnace data.

Do you publish drawings?

Assembly drawings, foundation loads and interface positions are issued as project documents under the contract. We do not publish customer-specific drawings on this site.


Design envelope per JB/T 14772-2024 §4.2. Ocean Hydraulic drafted this standard.

Round-the-Clock Technical Support

  • Multi-Channel Response: We offer support via phone, online chat, email, and remote access, with 24/7 emergency call response to provide solutions promptly.
  • Expert Team Support: A team composed of senior application engineers and after-sales service experts can handle everything from application consulting to complex fault diagnosis.
  • Continuous Improvement Feedback: Your on-site feedback is directly communicated to our R&D and production departments, driving continuous optimization of our products and services to tackle future challenges together.

Systematic Training

  • Role-Specific Training Courses: We design targeted courses for different roles including operators, maintenance technicians, and equipment managers, covering safety procedures, daily operations, maintenance, and troubleshooting.
  • Theory Combined with Practice: Training includes hands-on exercises with actual equipment, ensuring trainees gain practical skills. We also offer ongoing refresher training and skill certification.
  • Knowledge Transfer Support: We provide detailed operation manuals and maintenance videos to facilitate internal knowledge sharing and training of new employees.

Spare Parts Supply

  • Genuine Quality Assurance: All spare parts are manufactured according to original equipment drawings and standards, with traceable materials, ensuring perfect compatibility and long-term durability.
  • Rapid Supply Network: Relying on central warehouses and strategic inventory points, we maintain sufficient stock of common and wear-prone parts, committing to emergency dispatch in the shortest possible time to minimize waiting periods.
  • One-Stop Parts Catalog: We can create a dedicated spare parts profile for each piece of equipment you manage, providing a complete list from hydraulic components and wear parts to electrical controllers, simplifying your procurement and management processes.

Equipment Repair & Comprehensive Refurbishment

  • Professional Repair Services: We offer a full range of services from emergency breakdown repair to scheduled preventive maintenance. Our technicians are factory-trained and use specialized tools to ensure repairs restore equipment to original performance standards.
  • Complete Refurbishment & Performance Upgrades: We conduct systematic disassembly, evaluation, repair, and refurbishment of aging equipment. Going beyond simple restoration, we can integrate the latest control systems or safety modules during the process, giving old equipment new life with performance comparable to new machines.
  • Optimal Cost-Effectiveness: Compared to purchasing new equipment, a high-quality comprehensive refurbishment can save up to 40%-60% in costs, making it a wise choice for controlling capital expenditure and improving return on investment.

Smart & Automated Integration

  • Data-Driven Decision Making: By integrating sensors and data acquisition systems into the equipment, we enable real-time monitoring of operational status, energy consumption, and key parameters. Visual interfaces help managers optimize production cycles.
  • Predictive Maintenance Alerts: The system analyzes equipment wear trends to provide early warnings of potential failures, helping you shift from “reactive repair” to “proactive maintenance,” significantly reducing unplanned downtime.
  • Remote Operation & Support: We enable remote control and diagnostics for critical equipment, reducing personnel workload and safety risks. Our experts can also provide remote technical support.

Industry-Customized Solutions

  • On-site Diagnosis & Analysis: Our engineering team visits your production site to analyze process flows, spatial layouts, and operational pain points, ensuring the solution seamlessly aligns with your actual working conditions.
  • Modular Design Philosophy: Our equipment supports modular configuration and functional expansion, allowing you to flexibly add or reduce features based on capacity changes and process upgrade needs, making your investment more future-proof.
  • Turnkey Project Delivery: We provide full project management from design and manufacturing to installation, commissioning, and final acceptance, ensuring the equipment is ready for immediate use upon arrival and enables rapid production startup.